220 Hot Water Series – 2/2 Normally Closed
Asco Joucomatic Numatics Brass Solenoid Valve
These Asco 220 series of solenoid valves are of a compact design suitable for hot water and steam. A minimum pressure of 0.35 bar is required to operate these valves.
Size : 1″ to 2″
Fluids : Hot Water
Standard Seal : EPDM (150°C)
Operation : Pilot Operated “ Floating Piston
222 Hot Water 1-11/4″-11/2 Series – 2/2 Normally Closed
Asco Joucomatic Numatics Brass Solenoid Valve
Asco 222 series solenoid valves have a hung diaphragm design and offer reliable control in low pressure, high flow systems. No minimum pressure is required to operate these valves.
Size : 1″ to 1 1/2″
Fluids : Steam & Hot Water (up to 150°C dependent on size)
Standard Seal : EPDM (Ethylene-propylene)
Operation : Pilot Operated “ Hung Diaphragm
222 Hot Water 1/4-1/2 Series – 2/2 Normally Closed
Asco Joucomatic Numatics Brass Solenoid Valve
Asco 222 series pilot operated solenoid valves have a hung diaphragm design and offer reliable control in high pressure, high flow systems.
Size : 3/8 to 3/4″
Fluids : Steam & Hot Water (up to 184°C)
Standard Seal : PTFE
Operation : Pilot Operated
222 Y-Bodied Hot Water Series – 2/2 Normally Closed
Asco Joucomatic Numatics Brass Solenoid Valve
Asco 222 Y-Bodied series pilot operated solenoid provide a high flow with relative small orifices. A minimum pressure of 0.07 bar is required to operate these valves
Size : 1/4″ to 3/4″
Fluids : Steam & Hot Water (up to 165°C)
Standard Seal : PTFE | PTFE Reinforced
Operation : Pilot Operated
240 Hot Water Series – 2/2 Normally Closed
Asco Joucomatic Numatics Brass Solenoid Valve
These Asco 240 series of solenoid valves are suitable for automatic control of superheated water/steam. A minimum pressure of 0.4 bar is required to operate these valves.
Size : 3/8″ to 1″
Fluids : Steam & Hot Water (up to 170°C)
Standard Seal : PTFE “ Reinforced
Operation : Pilot Operated
263 Hot Water Series – 2/2 Normally Closed
Asco Joucomatic Numatics Brass Solenoid Valve
These compact Asco 263 series of solenoid valves are direct acting with stainless steel seats ensuring a long continuous cycling life in severe steam applications.
Size : 1/4″ to 3/8″
Fluids : Steam & Hot Water (up to 160°C dependent on size/voltage)
Standard Seal : PTFE – Reinforced
Operation : Direct Operated
